TDP - Plaster & Render Fibres

Plaster & Render Fibres

TDP 2.2mm Fibres

Minimises Shrinkage & Cracking


	Adding fibres to the plaster or render mix does not affect the workability of the mix.

Render is particularly susceptible to weathering, and if cracks occur during the drying process moisture can penetrate the cracks leading to significant problems at a later stage. Adding TDP's plaster and render fibres can reduce this drying and shrinkage.


	Ideal for patch and repair.

	Easily added, no need to 'tease' in like horsehair and will not 'rot'.

	TDP's plaster and render fibres have been produced specifically for these applications.

	The fibres, being short, do not need 'burning off' the finished surface.

Features & Benefits:

	Adds easily into mix.

	Disperses quickly & evenly.

	Non irritant.

	Can be used in mechanically applied plaster and render.

	Ideal for renders and lime based plasters which are particularly susceptible to cracking.

	Reduces the need for remedial work.

	200g sufficient for ten 25kg bags of plaster, or 25kg of dry render mix.

Bag sizes:

Plaster & Render Fibres are available in one bag size:

200g Bag


	Tried and tested at CERAM building technology

The TDP website is subject to TDP’s Terms and Conditions of Use.
Your use of this site shall be your agreement to abide by the terms set out in TDP’s Terms and Conditions of Use.

If you have any questions about these terms, please contact info@tdpltd.com